DELTA ARMORY ALPHA AR15 Eagle SilentOps DMR Full Tan

Description

The Eagle series is the latest addition to the range from the renowned Delta Armory brand. The Eagle series responds to the growing demand for electronic triggers directly in replicas, which are slowly replacing the traditional mechanical trigger contacts. The Eagle Series introduces a new ETU opto-magnetic processor unit that will provide fast trigger response while making the replica ready for use with 11.1 LiPo batteries. (The battery is inserted into the stock tube, specifically we recommend the Delta Armory 11.1V/1100mAh). Of course, there is a Deans-T connector that replaced the classic Tamiya connector.

As has become customary, Delta Armory delivers products that have an excellent price-quality ratio, and with the Eagle series this has been proven once again. With the features of top processors such as the Gate Asther right in the replica at this price, we rate the Eagle processor very positively. At the same time, the Eagle series provides not only trigger sensitivity adjustment via the processor unit but also trigger travel length via an adjustable screw located directly in the trigger guard. The ETU monitors the battery health in case of undercharging or overcharging it can shut down to protect the battery, it will alert you to this fact with an audible signal. At the same time, the processor also has an Active Brake feature.

Eagle ETU processor has the following options:

SEMI only on Auto mode

Burst 3 shots

Burst 5 shots

Binary trigger

AUG mode

Sniper mode

Trigger sensitivity with different levels

Pre-cocking mode with different degrees

Active brake can be switched on and off

Also new to the Eagle series is the new Delta Stock v.2, which has a modern design and rubberized buttstock for more comfortable aiming. At the same time, the Eagle series also includes a new pistol grip v.2, which has a better design but also a more sophisticated system of adjusting the motor pressure than the first version.

The AR15 SilentOps DMR ALPHA has a FULL METAL construction, where the entire replica (foregrip, body, trigger, sling loop and other smaller external parts) is made of metal. There is an adjustable rear sight mounted on a RIS rail. The forearm is a KEYMOD type at 12.2inch (31cm) in length, which has the advantage over a conventional RIS forearm of being lighter, at the same time the RIS rails that are on it can be moved as needed. (The RIS rails are not included.) The DA-A10 AR15 SilentOps DMR also features a 110mm foam silencer that starts on a thread at the end of the barrel in the forearm and continues all the way out of the replica. The replica also has a unique serial number.

The internal parts of the replica are standard as with the classic DA series - SHS piston with full metal gearing, SHS piston wheel handle, rotary hop-up chamber, and 6.03mm precision barrel. The advantage of this replica is the quick change QRS Gen. 2 spring - change the spring without disassembling the replica and quickly change the QRS motor. Of course, the internals are - metallic plain 7mm bearings, durable metal wheels and SHS feeder lever.

The package includes the replica and a pusher mid-cap DMAG 120 round magazine. For the magazine, we quickly recommend the 100 BB refill from Delta Armory

Weight: 2460g

Colour: Full Tan

Lenght of inner barrel [mm]: 360

Length [mm]: 745-830

The ordering of this product is only allowed for individuals aged 18 and older

Specifications